BH FITNESS G6427i Manuel page 10

ELEMENTS OF THE MONITOR.-
A: The electronic monitor has 7
displays: Time; Programs; Speed;
Distance; Incline; Pulse rate and
Calories.
B: Incline function quick access keys or
buttons (2- 4- 6- 8- 10- 12- 15).
C: The electronic monitor has 8 push
buttons or keys; PROGRAM; FAN;
MODE; INCLINE(↨); START/STOP;
SPEED Km/h (↨).
E: Slot for safety key.
F: Speed function quick access keys or
buttons (2- 4- 6- 8- 10- 14- 16 Km/h).
g: Safety key.
H: ECO key
START/STOPING.-
Plug the unit into a wall socket with an
EARTH terminal and set switch (L) to
English
position (1), Fig.1.
The safety key (g) must be inserted into
its spot (E) Fig.2, otherwise the
machine will not operate. As soon as
the safety key (g) is in place, the
machine will beep and all of the
displays will show a [00:00] value,
indicating that the machine is READY
to be used.
CHANGING FROM
KILOMETRES TO MILES.-
This machine has the option to display
speed in km/h or mph.
The factory setting for the machine is
km/h.
To change from km/h to mph follow
these steps:
Press and hold the PROGRAM and
MODE keys at the same time for 5
approximately seconds.
Press MODE to select F4 parameter in
display (A). Press +/- to select "M"
Miles or "km" kilometers.
10