Accessories - Alpine CDA-7990 Manuel D'installation Et De Connexion

Accessories

Installation
1
Remove the Detachable Front Panel (refer to page 6 of Owner's Manual). Slide mounting
sleeve from main unit and remove the front frame (see "Removal" on page 6).
Slide the mounting sleeve into the dashboard.
2
Ground Lead
Reinforce the head unit with the metal mounting strap (not supplied). Secure the ground lead
of the unit to a clean metal spot using a screw ( ) already attached to the vehicle's chassis.
NOTE
For the screw marked
Connect each input lead coming from an amplifier or equalizer to the corresponding output
lead coming from the left rear of the CDA-7990. Connect all other leads of the CDA-7990
according to details described in the "Connections" section.
All manuals and user guides at all-guides.com
Power cord
Mounting Sleeve (Included)
CDA-7990
Hex Nut (M5)
Metal Mounting
Strap
, use an appropriate screw for the chosen mounting location.
Flat screw (M5 x 6)
x 4
Dashboard
Screw
Bolt Stud
CDA-7990
Chassis
5
-EN