Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
13.2
Display brightness
It is possible to set the display brightness both for operation as well as standby mode.
>
Hold the SELECT/MENU button down again briefly. Use the < or > buttons to
select the [Brightness] item and press the SELECT/MENU button.
>
Use the < or > buttons to select one of the following functions:
[Operation] regulates brightness in the normal operating status. You can choose
from [AUTO] or [5 High] to [1 Low] brightness intensities. Using the < or >
buttons, select a brightness intensity and press the SELECT/MENU button to save.
[Standby] regulates the brightness in standby mode. You can choose here from
[AUTO], [4 High] and [0 Off] brightness intensities. Using the < or > buttons,
select a brightness intensity and press the SELECT/MENU button to save.
13.3
Language
>
Hold the SELECT/MENU button down again briefly. Use the < or > buttons to
select the [Language] item and press the SELECT/MENU button.
>
Using the < or > buttons, select one of the available languages and confirm the
selection by pressing the SELECT/MENU button.
DE
EN
FR
NL
139
Publicité
Table des Matières
