MC Crypt CDMPX-20 Notice D'emploi page 31

All manuals and user guides at all-guides.com
6. Connections and control elements
(1) OPEN/CLOSE button
This button serves to open the CD drawer.
The CD compartment cannot be opened during playback mode.
(2) 0 to 9 keys
With these keys, you can select the individual tracks on the CD directly.
(3) PITCH BEND - button
With this button you can temporarily increase the playback speed of the CD.
(4) Button PROG/FOLDER/ID3
CD operation: Use this button to program the playing order of selected tracks. You can program a playlist of up
to 20 tracks in the order of your choice.
A detailed description of the function can be found under „Programming and playing back a track
sequence" in one of the following chapters in this manual.
MP3 operation: When pressing this button, the laser skips to the start of the next folder in case of CDs with several
folders.
(5) REPEAT button
This button activates the repeat function.
Press once > the current track is repeated, display shows REPEAT 1
Press twice > the current folder on the CD is repeated, the display shows REPEAT FOLDER (only for
Press 3 x > the entire CD is repeated, display shows REPEAT ALL
Press 4 x > the REPEAT function is deactivated again
(6) Track jump backwards button |
With the track jump buttons, you can select any track on the CD. Press and hold the button to speed up the track
skip.
(7) SGL/CTN button
With this button you can switch the CD player between individual (SINGLE) track playback and continuous
(CONTINUE) track playback. With single track playback, the device goes into pause mode after every played
track, with continuous track playback, the device first enters pause mode after the whole CD was played back.
CDs with folder structure)
31