Spartherm Senso S Notice De Montage Et D'utilisation page 99

Installation is carried out in the reverse order. Firstly replace the
cover plate onto the cleaning opening and fix it in place with the
butterfly nuts.
When good operating conditions (good quality dry fuel, suitable per-
formance of the chimney flue, correct air settings and not too low
exhaust gas temperatures) are present, it will be possible to only
detect low levels of soiling and achieve significantly longer cleaning
intervals.
All manuals and user guides at all-guides.com
A = Remove the butterfly
nuts, remove the
cleaning cover
B = Remove deposits in
the pipes and on the
surfaces!
GB 45
7. TROUBLESHOOTING
You can rectify the following problems with your stove indepen-
dently, please contact your specialist dealer, stove builder or fitter
for all other problems.
7.1 GLASS EXPERIENCING HEAVY, QUICK AND
SOOTING
If this did not occur from the very beginning, please check the fol-
lowing points:
• Are the correct fuel and technology being used? (see 5.)
• Are you in the transitional period? (see 4.5)
• Are you experiencing atmospheric inversion? (see 4.5)
• Is the combustion air control fully opened? (control lever pulled
completely to the right)? (see 4.1.1)
• Is the external combustion air flue unblocked? (see 2.2.2.2)
• Does the sooting occur quickly within half an hour? (gradual
soiling during operation of the system is normal. A car wind-
screen will also become soiled during a journey!)
• Is the firebox insulation a perfect fit?
• Is the wood dry enough? (see 5.)
• Has enough wood been added to the fire? (when the volume of
wood is too low, an insufficiently high temperature is achieved
in the fireplace) (see 4.2)
GB
IRREGULAR