Packing And Unpacking - Dometic BLUTEC 40D Manuel D'utilisation, D'entretien Et D'installation

INFORMATION ON MOVEMENT AND INSTALLATION
RECOMMENDATIONS FOR MOVEMENT AND INSTALLATION
When moving and installing the appliance,
follow the indications provided by the manu-
facturer and marked on the packaging and in
the instructions for use. Those authorised to

PACKING AND UNPACKING

The packaging, to reduce
working dimensions, may
vary according to the type
of transport being used.
To facilitate transport, the
appliance may
shipped with some of its
components dismantled
and suitably protected
and wrapped.
Certain parts, particularly
electrical components,
are protected with damp-proof nylon.
All the information required to carry out load-
ing and unloading is indicated on the packag-
ing.
During unloading, check that the compo-
nents are undamaged and that all the compo-
nents are present.
LOADING AND TRANSPORT
Loading and transport, according to the place
of destination, may take place using different
means.
The following diagram illustrates the most
common solutions.
During transport, in order to avoid sudden
movements, make sure the load is adequate-
ly fastened to the vehicle.
All manuals and user guides at all-guides.com
be
carry out these operations must, if neces-
sary, organise a "safety plan" to safeguard
the persons directly involved.
A
The packing materials must be disposed of in
compliance with current laws.
The packaging may be:
A) on a pallet in a cardboard box
B) in a crate (for overland or air cargo ship-
ping)
means of
transport
- 15 -
B
IDM - 40200700400.tif
lifting
equipment
IDM - 40200700400.tif
User manual
GB