Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
ADJUSTMENT METHOD
The main functions of the unit do not require
particular adjustments by specialist techni-
RECOMMENDATIONS FOR USE AND OPERATION
The appliance has been designed and built to
satisfy all the working conditions indicated by
the manufacturer. Tampering with any of the
devices in order to achieve performance lev-
DESCRIPTION OF CONTROLS
A) Safety switch: Prepares the unit for
start-up or stops operation.
1) Position 1: the unit is powered by the battery
and is ready for start-up.
2) Position 0: Shuts off all power to the unit.
B) Thermal micro-circuit breaker (12Vdc):
serves to restore power to the electrical
commands after the safety circuit has
been triggered.
Press button to restore power to the elec-
trical controls.
C
All manuals and user guides at all-guides.com
INFORMATION ON ADJUSTMENTS
INFORMATION ON USE
G
D
cians, with the exception of working adjust-
ments carried out by the user.
els other than the ones foreseen may result
in risks for the health and safety of persons,
and in damage to property.
C) Starter switch: serves to enable and dis-
able the control panel and to turn the gen-
erator off.
D) Starter button: serves to turn the unit on.
E) Indicator (red light): indicates insuffi-
cient engine oil pressure
F) Indicator (orange light): Indicates that
the fuel level is low
G) Digital display: displays the working pa-
rameters and alarm messages.
A
E
F
- 23 -
GB
B
A
IDM - 40200701500.tif
User manual
Publicité
Table des Matières
Dépannage
