Recommendations For Maintenance; Maintenance Information - Dometic BLUTEC 40D Manuel D'utilisation, D'entretien Et D'installation

RECOMMENDATIONS FOR MAINTENANCE

Before carrying out any type of maintenance
operation, activate all the safety devices pro-
vided and evaluate whether or not those
working on the unit and those in the vicinity of
the unit should be informed. In particular,
TABLE OF MAINTENANCE OPERATIONS
Important
Keep the appliance in a state of maximum
efficiency, by carrying out the planned
maintenance operations foreseen by the
manufacturer. If these are properly car-
Action
check the fuel and top up
clean the fuel filter
change the fuel filter
check that there are no leaks
check the state of the injector
check the fuel injector phases
check the fuel injection pump
check the lubricant level in the oil sump
change the lubricant oil
clean the oil filter
check that there are no oil leaks
adjust play in the inlet and outlet valves
check that delivery connector is tight
check pump rotor
clean and deoxidise metal parts
change the zinc anode
change the piston rings
X* = must be carried out by an authorised YANMAR dealer or by qualified Dometic personnel..
All manuals and user guides at all-guides.com

MAINTENANCE INFORMATION

Daily
X
X
after use
X
before use
X
after use
make sure that the surrounding area is clear-
ly signed and prevent access to all the devic-
es that might,
unexpected dangers or endanger the health
and safety of persons.
ried out, they will ensure the appliance
provides optimum performance, a longer
working life and constant compliance
with the safety requirements.
1st month every 3
FIRST 50 months or
hours 200 hours
X
the first time
2nd time and following
X*
the first time
- 25 -
if activated, result in
every 6
yearly or
months or
1000 hours
400 hours
X
X
X*
X*
X
X*
2nd time and following
X*
X
X
User manual
GB
X*
X
X
X