Mitsubishi Heavy Industries SC-SL2NA-E Manuel De L'utilisateur page 10

How to Make Settings for One Unit
When managing an indoor unit with this central control without registering in any group, you can set individual
unit management with the operations below.
1. Press the MENU button and select
Each time you press this button, the display moves to the next step in the sequence in the diagram below.
The fl ashes.
2. Press the SET button.
The lights up and "01-00" fl ashes.
3 . Press the RESET button.
The GROUP No. display section fl ashes "--".
Example: "-- - 00"
4. Press the SELECT (
The selected unit number fl ashes.
Example: "-- - 05"
5. Press the SET button.
"- -" and the indoor unit number light up and after 2 seconds, fl ash.
The displayed unit number is now registered for individual management. If you register a unit number that had
not been registered before this, the number of managed units increases.
1 2, 5, 7
3
4, 6
Off
or ) button to set the indoor unit number.
.
– 9 –