Control Panel - SEAL 54 EL Mode D'emploi

4.1 Control panel

Figure 8
4.2 Motor control
The speed of the rollers is continuously adjustable between 0 and 4 m/min (0 and 13 ft/min). Pressing
the button runs the rollers in forward direction, pressing and holding the
direction of the rollers. The stop key halts the roller movement.
WARNING:
CARE MUST BE TAKEN NOT TO HAVE LOOSE CLOTHING, LONG HAIR,
JEWELRY AND FINGERS PINCHED BETWEEN THE ROLLERS.
1 Forward LED
2 Forward Button
1
3 LED optical
safety system
2
4 Stop Button
3
5 Reverse LED
4
6 Reverse Button
5
7 Speed
adjustment knob
6
8 Standby Button
9 Power LED
7
8
9
Lit when drive runs forward
Push button for forward
Lit when light beam is clear.
Flashing when emergency
stop button depressed.
Push button to stop drive
Lit when drive runs reverse
Push button and hold for
reverse
Adjust roller speed
Toggle on/off (press 2
seconds)
Lit when machine is on
button reverses the
11