SEAL 54 EL Mode D'emploi page 5

Introduction
We would like to thank you for purchasing a SEAL® 54/65 EL, designed to give you many years of
reliable service. By following the guidelines outlined in this manual for proper care and use, you can
depend on many years of trouble-free profitability from your investment.
Your 54/65 EL laminator meets the CE Directives (2004/108/EC, and 2006/95/EEC) and is RoHS
compliant. The laminator is also ETL listed for USA (UL 60950-1) and Canada (CSA C22.2 60950-1).
Statement of intended use.
The 54/65 EL laminator has been designed to be used with Seal® materials. When used with these
products, you are able to mount and laminate. Your machine has not been tested with any other
materials and is not recommend for use with products other than SEAL® supplies.
WARNING:
THIS MACHINE IS DESIGNED FOR MOUNTING AND LAMINATING. ANY USE
OTHER THAN THE INTENDED MAY CAUSE DAMAGE TO THE MACHINE OR
PHYSICAL HARM TO THE USER.
Liability Statement
The details given in this manual are based on the most recent information available to us. They may
be subject to change in the future. We retain the right to make changes to the construction or the
design of our products without accepting any responsibility for modifying earlier versions previously
delivered.
Standardized Symbols
Passages marked this way offer an idea / tip or other information on the efficient use of
this unit.
WARNING:
PLEASE PAY ATTENTION TO ALL PASSAGES MARKED THIS WAY. THIS
INFORMATION IS VITAL TO PREVENTING USER INJURY AND / OR DAMAGE TO
THE UNIT. FAILURE TO FOLLOW THIS INFORMATION COULD VOID THE USER'S
WARRANTIES AND TRANSFER ALL SAFETY OBLIGATIONS TO THE USER.
1