Eneo VKC-1330IR12-24 Mode D'emploi page 25

Description of the submenu settings
Submenu
WB
AWB
INDOOR / OUTDOOR White balance for indoor or outdoor
MANUAL
WAWB
AE
AUTO, MANUAL,
FLICKERLESS
SHUTTER
AGC
MODE
D/N
Note
BLC
CENTER, TOP,
BOTTOM, OFF
TITLE
TITLE MENU
ABCDEF...-,'
CMD <– –>
< > S E
Display
DISP0
DISP1
DISP2
DISP MODE
CAM SET
ID
BPS
BRIGHTNESS
SHARPNESS
All manuals and user guides at all-guides.com
Automatic white balance
Manual white balance setting. The red and green picture
values can be adjusted with the < and > buttons.
The setting is saved with MENU key.
Automatic white balance adjustment for wide angle
Automatic adjustment of iris, exposure control and gain
(shutter and AGC)
Normal / 100 / 125 (120) / 250 / 500 / 1000 / 2000 / 5000
/ 10000 / X2 / X4 / X8 / X16 / X32 / X64 (X: number display
low: shutter rate)
Manual adjustment of gain control (on/off)
Normal: normal mode
Low shutter: Low-shutter mode
WDR: Enhanced dynamic range mode (automatically,
AE is fixed at manual mode)
DIS: Digital image stabilization
ON: Day/Night switch is on. OFF: Manuel (if B/W in the
menu EFFECT is adjusted, then ON is Night / B/W and OFF
is Day/Colour)
In WDR mode the AE should be adjusted as follows:
AUTO: When using manual lenses
MANUAL: When using AI or DC controlled lenses
Weighting of picture center (The gray bar indicates the
actual setting).
Enter the camera title with the UP and DOWN key.
Character table
Position of tiltle on the screen (must be set prior to writing).
<– –> to move the cursor, < > to delete the characters
Store with S and leave the menu with E.
Displays camera title and camera ID.
Displays camera title, camera ID and zoom lens position.
Displays all camera status.
Display on, off and pushon (while the button is pressed).
Input of camera ID number. This is displayed upon OSD
activation.
Select serial communication speed (9600/19200 bps)
User can adjust brightness level (+9 ~ –9).
User can adjust sharpness level (0~20).
25
Factory Setting
AWB
AUTO
ON
Normal
OFF
OFF
DISP2
000
9600
0
08