Pinout - Eneo VKC-1330IR12-24 Mode D'emploi

4. Pinout

Power Supply at the VKC-1330IR12-24
12VDC
G
Note
3
1
2
Lens connection
Signal level
Remark
3
1
2
Lens connection
Signal level
All manuals and user guides at all-guides.com
24VAC
G
Only switch on the power supply when all the other connections have been carried out.
The use of power supply units with stabilised output voltage (12VDC ±10%) is
recommended.
Connector assignment for DC voltage controlled lenses
Description
1 Damping (-)
4
2 Damping (+)
3 Control (+)
4 Control (-)
AE status of menu should be selected to manual mode and shutter speed is fixed at
normal status.
A/I switch in dc position
To be optimized with LEVEL potentiometer
Use only DC voltage controlled lenses with internationally standardized plug pinout.
Connector assignment for Videosignal controlled lenses
Description
1 Supply voltage
4
2 N.C.
3 Video
4 Ground
AE status of menu should be selected to manual mode and shutter speed is fixed at
normal status.
A/I switch in video position
Optimise via the „LEVEL" regulator on the AI lens.
Colour
red
–
white
black
20