End Of Season Maintenance; Maintenance Summary Table - Grillo G110 Manuel D'entretien

Masquer les pouces Voir aussi pour G110:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

ROTARY TILLER – Check the oil level every 100 hours by removing the plug; the oil must almost
fill the rotary tiller box. If necessary add the same oil as for the gearbox (fig. 4, no. 3).
HELPFUL HINTS FOR PROPER USE
1) Important! Always use the clutch for forward and reverse travel.
2) Never leave the out in the rain.
3) Keep the reversing mechanism in the handlebar support clean and well oiled.
4) Never force the gearbox if the gear does not engage; give a succession of little touches on the
clutch.
5) Never strain the engine: if smoke comes out of the exhaust, the engine is toiling and must be
slowed down.
6) Even impossible ground can be tilled, but the machine must be well run-in first.
7) Check the tyre pressure often.
8) When fitting the implements (e.g. rotary tiller) take care not to damage the centring device (see
chapter on «Implements»).

END OF SEASON MAINTENANCE

Clean the machine carefully. Change the engine, gearbox and tiller gearbox oil. Clean the air filter.
Sharpen and grease the blades, replacing them if worn.
PROCEDURE
check the level
Engine oil
change
Air filter
replace
check/adjust
Spark plug
replace
Check the level
Gearbox oil
replace
Check that the engine intake grid is
clean
Check blade
Cutter bar
attachment
grease
Check that tines are well-sharpened
and well-fixed
Lubricate with grease
Check clutch clearance (free play)
● recommended procedure
‫ ٭‬procedure to be carried out if necessary
All manuals and user guides at all-guides.com
Translation of the Original Instructions

MAINTENANCE SUMMARY TABLE

EVERY 8
HOURS
check
AFTER
EVERY
20
50
HOURS
HOURS
12
EVERY
ONCE A
100
YEAR OR
HOURS
EVERY
200
HOURS
‫٭‬

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

G108

Table des Matières