Identification And Servicing - Grillo G110 Manuel D'entretien

IMPROPER USES TO BE AVOIDED
20) Any improper uses causes the machine to become null and void and the constructor will
decline all liability.
21) Never use the machine to transport people, animals or objects.
FURTHER SAFETY ADVICES
22) Never tamper with or deactivate the safety devices.
23) While servicing and cleaning the machine, while mounting the different implements and
while transporting the machine on other vehicles, the engine must always be switched off.
24) Never have anyone check the machine while you are driving with the engine running.
25) The user is always responsible for injury or damage to third parties. Misshapen or damaged
hoes must always be replaced and never repaired.
26) Always use original Grillo spare parts.
27) Before starting any work with the machine, check that all the accident prevention systems with
which it is equipped are in perfect working order. They must never be disabled or tampered with.
28) Before starting work, check that the nuts and bolts securing the tiller and hoes are perfectly
tight.
29) All protective fittings (hoods, mudguards, etc.) must be kept in place during operation.
30) Never clean the tiller with the engine running.
31) Never use the machine barefoot.
32) Never change the engine settings, especially the max. r.p.m.
33) Allow the engine to cool before placing the machine indoors.
34) CAUTION: to reduce the risk of fire, keep the engine, the exhaust pipe and the exhaust
manifolds free from grass, leaves, dust, etc...
36) If you have to empty the fuel tank, do this outdoors.
37) This rotovator must be driven by only one operator.
38) Everything not explicitly permitted in this manual is forbidden.
39) Keep all the hazard and safety labels in perfect conditions.
40) Do not use the machine if you do not have the possibility to seek for help in case of
urgent need.
AFTER-SALES SERVICE
This handbook provides instructions for use of the cultivator and for correct basic servicing which
the user can carry out himself. For all procedures not described in this handbook, contact your
local dealer.
SPARE PARTS
Always use original spare parts, as they are the only ones to offer complete safety and
interchangeability. Always state the serial number when ordering. For engine parts, refer to the
specific handbook.
WARRANTY
The guarantee is given in compliance with the current law. The dealer will have to give the client a
copy of the registration card of the machine, which they will print up from the Grillo website.
the engine the guarantee of the relative manufacturers apply.
All manuals and user guides at all-guides.com
Translation of the Original Instructions

IDENTIFICATION AND SERVICING

IDENTIFICATION
The vehicle's serial number is punched on the
nameplate on the left-hand longitudinal member
of the chassis and on the gearbox nameplate.
Always state the serial number when ordering
spare parts.
7
For