Checking The Hedge Trimmer; Checking The Controls - Stihl HSA 94 R Notice D'emploi

English
► If the cutting blades continue to run after about 1 second:
Pull connecting cable plug out of the socket and contact
your STIHL servicing dealer.
Your hedge trimmer has a malfunction.
► Push the retaining latch into position
.

9 Checking the Hedge Trimmer

9.1

Checking the Controls

Retaining latch, trigger lockout and trigger
► Pull the connecting cable plug out of the socket.
► Push the retaining latch into position
► Attempt to pull the trigger lever without depressing the
lockout button.
► If the trigger can be pulled: Do not use your hedge trimmer
and contact your STIHL servicing dealer.
Retaining latch or trigger lockout is faulty.
► Push the retaining latch into position
► Depress the trigger lockout lever and hold it in that
position.
► Pull the trigger.
► Release the trigger and trigger lockout lever at the same
time.
► If the trigger or trigger lockout lever is stiff or does not
spring back to the idle position: Do not use your hedge
trimmer and contact your STIHL servicing dealer.
Trigger or trigger lockout is faulty.
Switch lever
► Pull the connecting cable plug out of the socket.
► Depress the switch lever and release it again.
► If the switch lever is stiff or does not spring back to its idle
position: Do not use your hedge trimmer and contact your
STIHL servicing dealer.
The switch lever has a malfunction.
40
All manuals and user guides at all-guides.com
Switch on the hedge trimmer
► Insert the connecting cable plug.
► Depress the switch lever and release it again.
► If the cutting blades have run or are running: Do not use
► Depress the trigger lockout lever and hold it in that
► Pull the trigger and hold it there.
► If the cutting blades run: Do not use your hedge trimmer
► Depress the switch lever and hold it in that position.
.
► If 3 LEDs flash red: Pull connecting cable plug out of the
► Release the switch lever.
► If the cutting blades continue to run after 1 second: Pull
.
your hedge trimmer and contact your STIHL servicing
dealer.
The trigger has a malfunction.
position.
and contact your STIHL servicing dealer.
The switch lever has a malfunction.
The cutting blades run.
socket and contact your STIHL servicing dealer.
There is a malfunction in the hedge trimmer.
The cutting blades stop running after about 1 second.
connecting cable plug out of the socket and contact your
STIHL servicing dealer.
Your hedge trimmer has a malfunction.
9 Checking the Hedge Trimmer
0458-722-9621-A