Funkwerk elmeg CS290 Notice D'utilisation page 22

English
g
Call with subscriber 1, Party 2 is put on hold
To end the three-party conference, press the softkey below »
ber of the last previous active connection. The other subscriber is put on hold.
Call switching
When a call is transferred, the active subscriber and the subscriber for the connection previously put on
hold are always connected with one another.
You can initiate an inquiriy call yourself (e.g. in order to announce the call) and can then transfer the call.
g
Call with subscriber 1
Keypad
Using the Keypad function you can manage service or features in the PABX system or in the network of the
service provider by entering character strings and digit sequences via the keypad.
g
keypad
Conversation
Tone dialing (dtmf dialing)
Using tone frequency dialing, you can transmit multifrequency signals (DTMF signals) during an ongoing
call in order, for example, to poll your answering machine. If call waiting is active for an ongoing connecti-
on, tone frequency suffix dialing can not be utilized.
g
Conversation
RESET - Restauring the default telephone settings
You can reset the telephone to its initial state using the procedure described below. All of the data that you
have entered previously will be deleted.
F
a
Handset on hook
S
Press the softkey below »
phone to its initial state. If you do not wish to
have the data deleted press the softkey below
» «.
no
The telephone is reset to its initial state. All data
are deleted.
18
All manuals and user guides at all-guides.com
R
Subscriber 1 in hold condition
S
Input of character strings and digit sequences
S
dtmf
Input of character strings and digit sequences
S
config
« to reset the tele-
ok
S
conf
Conference with subscriber 1 and 2
«. You are reconnected with the subscri-
back
t
Dial call number
t
t
> S
service
Sure to delete all?
no user
01.11.05 08:30
tbuch vip
d
S
x-fer
S
data
ok
}