Funkwerk elmeg CS290 Notice D'utilisation page 13

Connected to a pabx
F
Begin as follows: »
• Number length (softkey »
The maximum length for internal numbers that are assigned to different internal extensions within
your PABX system;
• Automatic exchange line access (softkey »
With direct exchange line access, you do not have to dial the line access digit for conducting outgoing
calls.
• Line access digit (softkey »
Line access digit for the pabx; the line access digit is placed automatically in front of the number of
the caller for the external calls.
Setting the User Interface
F
Begin as follows: -»
Connecting / using a headsets (softkey »
Configuring a headset; For headset operation, use the function key »
use the function key »
auto-answer
• Default setting during a connection
Select whether in the initial settings »
Programming function keys
F
Begin as follows: -»
• Direct dial buttons (softkey »
Programing a telephone number for a specific function button.
• Function buttons (softkey »
• Select the function key that you wish to assign a new function to . Confirm your selection by pressing
O
(an extension key in this example).
• Enter the desired internal extension number »
Possible settings and allocation options are described in the detailed operating instructions
provided on the CD.
Deactivating the extended configuration mode
Enter the code number »**46782550##« (Vanity-format »**INSTALL0##«).
If the ISDN telephone is disconnected from the ISDN network, (for example by unplugging the ISDN con-
nector of the phone or by switching off or resetting the pabx), the extended configuration mode will be auto-
matically switched off.
All manuals and user guides at all-guides.com
«-
config
«)
number
ln. access
«)
extern
«--» «
adjust use
«)
headset
«.
« or »
DTMF
t«-
adjus
« oder »
list new
«)
function
Number
«)
«. You may also want to
headset
« is possible during an ongoing call;
keypad
«)
prog new function
1_:-
1_ / Extension key
Number>
« and confirm by pressing
English
{}
O
.
9