Funkwerk elmeg CS290 Notice D'utilisation page 16

English
Setting the melody
In the menu » «, »
msn-1
«.
ternal
O
Use the arrow buttons to set the desired melo-
dy.
Confirm your entry by pressing OK.
Setting the ringer melody volume
In the menu » «, »
MSN-1 Program MSN-1
«.
ternal
O
Use the arrow buttons to set the volume.
Confirm your entry by pressing OK.
Assigning a name to the MSN extension number
You can assign your own names (max. 5 characters) to the MSN extension numbers.
The assignments for the keypad for entering letters and digits are described on page 10.
In the menu »
MSN-1
t
Enter the name desired name.
In this example: »
O
Confirm your entry with OK.
Once a name has been entered for a number, the softkey designations »
are replaced by the corresponding names in the menu. In this example here »
of » «.
msn-1
Operation
Important notes
Not all of the features described here may be implemented in the standard ISDN connection of your service
provider. Contact your service provider to determine which features come standard with your ISDN access
and which ones you must apply for separately.
If the ISDN telephone is disconnected from the ISDN network, (for exampleby unplugging the ISDN con-
nector of the phone or by switching off or resetting the pabx), several settings and lists will be lost.
For ex.: Temporarily stored text messages (SMS, UUS1), a requested Completion of call to busy subscriber
or data downloaded from the pabx.
Starting a call
Dial number - no correction possible
b
Lift up handset
12
All manuals and user guides at all-guides.com
« press »
Program msn-1
« press »
«, »
Program MSN-1
«.
STORE
t
Dial call number
« and then »
Sound internal
Select melody
- ---------
« and then »
volume internal
Select volume
MSN-1 - ------ +
>
« - -press »
msn-name
Own MSN designation
MSN-1>STORE
«, »
msn-1 msn-2
STORE
g
Conversation
« or »
ex-
{}
2
« or »
ex-
{}
«.
« or » «
msn-3
« is displayed instead