Boneco 2055 Instructions D'utilisation page 23

Water quality maintenance
The innovative Ionic Silver Stick (25) uses the proven anti-
®
bacterial properties of silver, thereby keeping the water free
of bacteria and germs. The ISS gives off silver ions into
the water over a period of more than one year. It is self-
renewing and requires no maintenance. The position of the
ISS in the appliance can be seen in Fig. 25. First, switch
the unit off.
25
Lifecycle indicator
Your appliance comes with
a standard lifecycle indicator
on the back of the upper part
for changing the Ionic Silver
Stick . To remind yourself
®
of when you put the ISS into
operation, please cross the
current month on the indica-
tor and write the current year
on the line provided.
Operating 2055
B C
A
A) Rotary switch
Connect the appliance to the mains and turn rotary switch
A to position C or D as required. To switch the appliance off,
turn the rotary switch to position B.
B) Switching on/off
If the rotary switch is in position B, the appliance is swit-
ched off.
C) Normal mode
If you select position C, then normal mode is set, and the
appliance reaches maximum humidity output.
D) Night mode
If you turn the rotary switch to position D, the appliance
works in night mode and is especially quiet.
E) Operating light
The green light (LED) (F) illuminates when the appliance
is switched on.
Operating 2055D
D E C
G
A) Switching on/off
Turn rotary switch A from the OFF position to position H or
G as required. Position H is especially quiet (night mode).
Position G (normal mode) achieves maximum humidity
output. As soon as the appliance is switched on, the display
shows the current relative air humidity. The measurement
is accurate to +/- 5%.
B) Setting the humidity output
The appliance is fitted with a hygrostat. This measures the
relative air humidity and automatically switches the appli-
ance off when the desired value is reached. When swit-
ching the unit on using the rotary switch (A), the desired
value is preset to 55%.
The desired value can be adjusted in steps of 5% by pres-
sing button B. While selecting the humidity output, the
desired value is blinking. The word DESIRED appears on
the display (E). The setting for the relative humidity ranges
from a minimum of 30% to a maximum of 70% . A rela-
tive humidity of between 40 and 60% is recommended.
After a few seconds, the display automatically changes
D E F
H
A
B
23
en