Filling The Tank - Boneco 2055 Instructions D'utilisation

Filling the tank

Do not operate the appliance when the water
tank is empty!
en
• Remove the water tank (19).
• Ensure that there are no foreign objects in the water
tank.
• Remove the water tank cap from the tank (20). Fill the
tank with fresh, cold tap water (21). Fully close the
bayonet seal to prevent the water tank from leaking
(22). Place the water tank on the water base (23). Do
not add any additives to the water!
• Do not pressurise the water tank, e.g. by filling it with
carbonated mineral water.
• Connect the mains cable to the mains and switch the
appliance on.
The 2055D (digital) unit is fitted with an automatic cut-
off switch. As soon as the water tank is empty, the unit
switches off automatically. The empty indicator illuminates
(also see section "Operation 2055D"). This function is not
available on the 2055 unit.
22
19 20
21
22
23
Use of fragrances
The base contains a special fragrance container (24). Wad-
ding soaked with fragrance can be placed in this container.
Place fragrances only in the container provided! Water ad-
ditives (e.g. essential oils, fragrances, water conditioners)
must NOT be used in the tank or anywhere else in the ap-
pliance! Even a small amount can damage the plastic or
cause cracks. The material is not suitable for the use of
additives. One drop is enough to damage the water tank
and therefore render the unit unusable. Appliances that
are damaged by additives are excluded from the warranty.
The fragrance container is also used as a tool for opening
the rotary locks of the humidifying disks. To learn more
about removing the disks, refer to section „Cleaning the
humidifying disks".
24