Low Battery Indication; Lcd Display Information; Turning The Unit On/Off - Topcom TwinTalker 1400 Manuel D'utilisateur

8

LOW BATTERY INDICATION

When the battery charge level is low, a beep will be heard every 10 minutes to indicate that the batteries needs to be
replaced.
Dispose of batteries at a designated battery disposal unit and not in the
household waste. Do not short-circuit & dispose of in fire. Remove the
batteries if this device is not going to be used for a long period.
9 BUTTONS
9
8
7
T win T alker 1400
6
10

LCD DISPLAY INFORMATION

13
12
11 USING THE TWINTALKER 1400

11.1 TURNING THE UNIT ON/OFF

Display
To turn ON:
• Press and hold the
rent channel.
To switch OFF
• Press and hold the
11.2 ADJUSTING SPEAKER VOLUME.
• Press the
is displayed together with the Volume icon.
• Press the
11.3 RECEIVING A SIGNAL
The unit is continuously in the RECEIVE mode when the unit is switched ON and not transmitting.
TOPCOM TWINTALKER 1400
All manuals and user guides at all-guides.com
1. LCD Display
2. UP button
- Increase the speaker volume
- Select the next item in the menu.
1
3. Microphone
4. DOWN button
2
- Decrease the speaker volume
- Select the previous item in the menu.
3
5. Speaker
6. MENU/ON-OFF button
- Turn the power On or Off.
4
- Enter menu.
7. CALL button
- Transmit a call tone
5
8. PUSH TO TALK button
- Press To Talk or release to listen
- Confirm a setting in the menu
9. Antenna
10. Channel number/Volume level indication
10
11. TX frame. Displayed when transmitting
12. Volume icon. Displayed while setting the speaker
11
Volume.
13. Scan icon. Displayed during the CHANNEL SCAN mode.
- button. The unit will "beep" and the LCD display will display the cur-
- button. The unit will "beep" and the LCD display will turn blank.
- button in stand-by-mode to increase the speaker volume. The volume level
- button to decrease the speaker volume.
TOPCOM TWINTALKER 1400
PTT
5