Technical Data - Husqvarna PG 830S Manuel D'utilisation

Technical data

Motor power, kW/hp
Rated current, A
Rated voltage, V
Phases
Frequency, Hz
Weight, kg/lbs
Grinding width, mm/in.
Grinding disc, mm/in.
Grinding pressure, kg/lbs
Grinding pressure with support wheel, kg/lbs
Weight in position 1 (forward), kg/Ibs
Weight in position 1 (forward) with support wheel, kg/Ibs
Weight in position 2 (vertical), kg/Ibs
Weight in position 2 (vertical) with support wheel, kg/Ibs
Weight in position 3 (rearward), kg/Ibs
Weight in position 3 (rearward) with support wheel,
kg/Ibs
Grinding disc speed, min/max rpm
Grinding head speed, min/max rpm
Direction of rotation (from above)
Max. gradient, degrees °
Enclosure, IP
Recommended dust extractor
Dust extractor attachment, mm/in.
3
Min. Air flow, m /h /CFM
1
Technical data for dust extractors are not conclusively describing actual performance over time between dif-
ferent dust extractors. For Husqvarna products OSHA objective data are available at
www.husqvarnacp.com/us.
24
Technical data
1
PG 830S
3x220-240 V
11/15
50
220-240
3-phase
50-60
497/1096
800/31.5
3x270/10.5
238/524
255/561
298/656
315/693
249/548
266/585
195/429
212/466
421-1403
28-92
Grinding head: clockwise
Grinding disc: counter-
clockwise
10
54
76/3
815/480
PG 830S
3x440-480 V
11/15
30
440-480
3-phase
50-60
497/1096
800/31.5
3x270/10.5
238/524
255/561
298/656
315/693
249/548
266/585
195/429
212/466
421-1403
28-92
Grinding head: clockwise
Grinding disc: counter-
clockwise
10
54
76/3
815/480
1253 - 003 - 22.01.2020