Handle Positions - Husqvarna PG 830S Manuel D'utilisation

6. Hang the dust extractor hose on the suspension
device on the support frame to prevent tension in the
dust extractor hose.
7. Disengage the support frame.

Handle positions

• Operation position of the handle:
• Transport position of the handle:
1253 - 003 - 22.01.2020
• Servicing position of the handle:
To adjust the handle and the handlebar
WARNING: Be careful when you adjust the
handle and the handlebar. Make sure that
the handle and the handlebar locks into
position. The moving parts can cause injury.
Set the handle height as close as possible to the height
of the operators hip. During operation the product can
pull to the side. The hip of the operator can help to stop
this movement to the side.
1. Pull the lock lever (A) on the handle in the direction
of the control panel and hold it in this position.
2. Adjust the handle (B) to an applicable operation
height.
3. Release the lock lever on the handle to lock the
handle position.
A
B
13