Publicité
Les langues disponibles
Les langues disponibles
12
12 Device Information
Device information for brine-to-water heat pumps for heating purposes
1
Type and order code
2
Design
2.1
Degree of protection according to EN 60 529
2.2
Installation Location
3
Performance data
3.1
Operating temperature limits:
Heating water flow
Brine (heat source)
Antifreeze
Minimum brine concentration (-13 °C freezing temperature)
3.2
Temperature spread of heating water at B0 / W35K
3.3
Heat output / COP
3.4
Sound power level
3.5
Heating water flow with an internal pressure
differential of
3.6
Brine throughput with an internal pressure
differential (heat source) of
3.7
Refrigerant; total filling weight
3.8
Lubricant; total filling weight
4
Dimensions, connections and weight
4.1
Device dimensions without connections
4.2
Device connections to heating system
4.3
Device connections to heat source
4.4
Weight of the transportable unit(s) incl. packing
5
Electrical Connection
5.1
Nominal voltage; fuse protection
5.2
Nominal power consumption
5.3
Starting current with soft starter
Nominal current B0 W35 / cos ϕ 5)
5.4
5.5
max. power consumption of compressor protection
(per compressor)
6
Complies with the European safety regulations
7
Additional model features
7.1
Water in device protected against freezing
7.2
Performance levels
7.3
Controller internal/external
1. This data indicates the size and capacity of the system according to EN 255. For an analysis of the economic and energy efficiency of the system, both the bivalence point and
the regulation should also be taken into consideration. The specified values, e.g. B10 / W55, have the following meaning: Heat source temperature 10 °C and heating water flow
temperature 55 °C.
2. Operation with 2 compressors
3. Operation with 1 compressors
4. Note that additional space is required for pipe connections, operation and maintenance.
5. See CE declaration of conformity
6. The heat circulating pump and the heat pump controller must always be ready for operation.
E-8
All manuals and user guides at all-guides.com
°C
°C
1
at B-5 / W55
kW / ---
kW / ---
1
at B0 / W50
kW / ---
kW / ---
1
at B0 / W35
kW / ---
kW / ---
dB(A)
m³/h / Pa
m³/h / Pa
type / kg
type / litres
4
H x W x L mm
Inch
Inch
kg
V / A
1
B0 W35
kW
A
A / ---
W
6
SI 30CS
IP24
Indoors
Up to 55
-5 to +25
Monoethylene glycol
25 %
9.6
2
27.8 / 2.4
3
10.6 / 1.8
2
31.5 / 2.9
3
16.0 / 3.3
2
32.4 / 4.1
3
17.6 / 4.4
59
2.9 / 9000
8.4 / 15000
R407C / 6.7
Polyolester (POE) / 3.54
830 x 1480 x 890
G 1 1/4'' external
G 1 1/2'' external
299
400 / 35
7.82
26
14,1 / 0,8
70
5
Yes
2
External
SI 70CS
IP24
Indoors
Up to 55
-5 to +25
Monoethylene glycol
25 %
9.7
58.5 / 2.4
26.8 / 2.2
67.2 / 3.0
35.0 / 3.1
67.8 / 4.1
37.2 / 4.4
69
6.0 / 6000
16.0 / 12500
R407C / 12.0
Polyolester (POE) / 8.2
830 x 1480 x 890
G 2'' external
G 2'' external
450
400 / 63
16.34
60
29,8 / 0,8
70
5
Yes
2
External
Publicité
Chapitres
