Publicité
Les langues disponibles
Les langues disponibles
3. Now turn the temperature knob to the next higher
number and wait until the "Heat On" light goes off. Feel
the floor temperature with your hand, if the floor is too
hot turn the temperature knob back 1/2 a number and
wait until light goes off. If the floor is cool turn the
temperature knob to the next higher number and wait
until the "Heat On" light goes off. Continue this proce-
dure until the desired floor temperature is obtained.
4. If the floor warming is not required, for example in the
summer, then turn the temperature knob to "OFF".
This disconnects boths sides of the line to the heaters
without having to turn power off at the main disconnect.
NOTE
The temperature between the numbers on the dial plate
is approximately 10°F (10 = 140°F see Fig. 5).
NOTES
4
FLOOR WARMING
HEATING SYSTEM
7
6
5
4
3
HEAT
ON
OFF
Figure 5. Max. Setting
8
Max. temperature
9
setting 140°F
(60°C)
10
Publicité
