Ec Declaration Of Conformity (Original); Health And Safety Of The Operator; Noise Information - Hilti GX90-WF Mode D'emploi

14 EC declaration of conformity (original)

Designation:
Type:
Generation:
Year of design:
We declare, on our sole responsibility, that this
product complies with the following directives and
standards: 75/324/EEC,
EN ISO 12100, EN 13752‑1:2008‑12, EN 50081‑2,
EN 1127‑1, EN 417, ISO 8662‑11 AMD 1:2001-12,
EN 792‑13:A1:2008‑09,
64/548/EEC, EN 55011:1998+A1:1999, CISPR 11:2003,
A1:2004, IEC 61000‑6‑2:2005, EN 61000‑6‑2:2001,
IS1:2005, IEC 61000‑6‑3:1996, EN 61000‑6‑3:2001,

15 Health and safety of the operator

15.1 Noise information

Gas-actuated fastening tool
Type
Model
Caliber
Power regulation
Application
Declared measured values of noise characteristics according to 2006/42/EC Machinery Directive in conjunction
with DIN EN 15895
Sound power level, L
WA, 1S
Emission sound pressure level at the workplace,
L 2
pA, 1s
Peak sound pressure emission level, L
1 ± 2 dB (A)
2 ± 2 dB (A)
3 ± 2 dB (C)
Operation and set-up conditions: Set-up and operation of the fastening tool in accordance with E DIN EN 15895-
1 in the semi-anechoic test room of Müller-BBM GmbH. The ambient conditions in the test room conform to
DIN EN ISO 3745.
Testing procedure: Enveloping surface method in anechoic room on reflective surface area in accordance with
E DIN EN 15895, DIN EN ISO 3745 and DIN EN ISO 11201.
NOTE The noise emissions measured and the associated measurement uncertainty represent the upper limit for the
noise values to be expected during the measurements.
Variations in operating conditions may cause deviations from these emission values.
All manuals and user guides at all-guides.com
Gas-driven fastening tool
GX 90-WF
2011
91/155/EEC, 64/548/EEC,
EN 60529:2000‑09,
1
3
pC, peak
IEC 61000‑4‑2:1995,
IEC 61000‑4‑8:1993: A1:2000, 2006/42/EC, 2011/65/EU.
01
Hilti Corporation, Feldkircherstrasse 100,
FL‑9494 Schaan
Norbert Wohlwend
Head of Quality & Processes Manage-
ment
BU Direct Fastening
04/2013
GX 90-WF
Series
Gas can 40 g
None
Fastening to squared timber 500 x 100 x 100 mm using
nail with smooth shank 75 x 2.8 mm
108 dB (A)
106 dB (A)
138 dB (C)
IEC 61000‑4‑3:2006,
Tassilo Deinzer
Head of BU Direct Fastening
BU Direct Fastening
04/2013
23
en