Disposal; Manufacturer's Warranty - Tools; Ec Declaration Of Conformity (Original); Confirmation Of Cip Testing - Hilti DX 2 Mode D'emploi

11 Disposal

Most of the materials from which Hilti tools or appliances are manufactured can be recycled. The materials must
be correctly separated before they can be recycled. In many countries, Hilti has already made arrangements for
taking back old tools and appliances for recycling. Ask Hilti customer service or your Hilti representative for further
information.

12 Manufacturer's warranty - tools

Please contact your local Hilti representative if you have
questions about the warranty conditions.

13 EC declaration of conformity (original)

Designation:
Type:
Generation:
Year of design:
We declare, on our sole responsibility, that this product
complies with the following directives and standards:
2006/42/EC, 2011/65/EU.

14 Confirmation of CIP testing

The following applies to C.I.P. member states outside the
EU and EFTA judicial area: The Hilti DX 2 has been system
and type tested. As a result, the tool bears the rectangular
PTB approval mark showing approval number S 830. Hilti
Powder-actuated fasten-
ing tool
DX 2
01
2014
Hilti Corporation, Feldkircherstrasse 100,
FL‑9494 Schaan
Norbert Wohlwend
Head of Quality & Processes Manage-
ment
BU Direct Fastening
02/2014
Technical documentation filed at:
Hilti Entwicklungsgesellschaft mbH
Zulassung Elektrowerkzeuge
Hiltistrasse 6
86916 Kaufering
Deutschland
thus guarantees compliance with the approved type.
Unacceptable defects or deficiencies, etc. determined
during use of the tool must be reported to the person
responsible at the approval authority (PTB) and to the
Office of the Permanent International Commission (C.I.P.).
en
Lars Taenzer
Head of BU Direct Fastening
BU Direct Fastening
02/2014
13