Valor Madrona MFCS01 Manuel D'installation page 6

2. Install the fan motor at the back of the heater.
Using the lower set of fixing holes on the fan will
ensure more space to handle the receiver in front
of the fireplace.
Rear view
Lower set of
fixing holes
Casting Side Panels
1. Place the stove in its final position and fix it to the
floor (necessary for installations in mobile homes).
Appliance's foot print
6
See 555CFK—Circulating Fan
Kit manual for complete
installation details.
2. On the casting side panels, release the top and
bottom screws.
3. Drop a hinge pin on the back corner of base and
drop the side panel on the pin.
4. Rotate the panel towards the engine.
3
4
5. Repeat with the other casting side panel.
6. Adjust the position of the engine to locate the top
and bottom screws of the side panels into the slots
of the engine's side bracket. Tighten the top and
bottom screws.
7. Adjust the engine as required and secure it to the
casting base at bottom of its side brackets with the
nuts and bolts provided.