Operating With A Dmx Controller - Renkforce 1282378 Notice D'emploi

AUTO1 = Automatic mode
• "AUTO1" appears on the display.
• The light effects are controlled by the integrated controller (use when moving head is standing, light
shines upwards).
AUTO2 = Automatic mode
• "AUTO2" appears on the display.
• The light effects are controlled by the integrated controller (use for overhead installation, light shines
downwards).
SOUND1 = Sound-to-light mode
• "SOUND1" appears on the display.
• In sound-to-light mode, the moving head responds to the music signals that are detected via a
microphone. The moving head then creates a light show in time with the music (use when moving head
is standing, light shines upwards).
SOUND2 = Sound-to-light mode
• "SOUND2" appears on the display.
• In sound-to-light mode, the moving head responds to the music signals that are detected via a microphone.
The moving head then creates a light show in time with the music (use for overhead installation, light
shines downwards).
The internal microphone detects acoustic signals such as singing, knocking and clapping.
CUSTOM = Standalone mode
• "CUSTOM" appears on the display.
• The movements and light effects are controlled by a user-defined scene. Program a scene under "EDIT".
TEST = Test run of the device's functions
• "TEST" appears on the display.
• The movements and the moving head are controlled by a internal predefined program.
SLAVE = Operated via the controller on another moving head
• "SLAVE" appears on the display.
• The moving head can be used as a device in a master-slave chain. In this setup, the integrated controller
on the master device controls the connected slave devices. Every device in the chain is assigned a
function (master/slave). Each chain only has one master device.
• For more information on setting up master-slave chains, please refer to "Setting up a master-slave chain".
• In this setup, the master device works according to user-defined values ("CUSTOM") in automatic or
sound-to-light mode and controls the slave devices synchronously.
d) Operating with a DMX controller
Each DMX device in a DMX chain requires a so-called DMX starting address to be clearly identified by the
controller. This DMX starting address specifies the first DMX channel to which the moving head responds.
42
All manuals and user guides at all-guides.com