Basic Settings - Renkforce 1282378 Notice D'emploi

Display Option
EDIT 0 - 255
XYSPEED
EDIT 0 - 255
COLOUR
EDIT 0 - 255
GOBO1
EDIT 0 - 255
GOBO2
EDIT 0 - 255
GOBO2ROT
EDIT 0 - 255
PRISM
EDIT 0 - 255
FOCUS
EDIT 0 - 255
DIMMER
EDIT 0 - 255
STROBE
EDIT 0 - 255
TIME
EDIT 0 - 255
USE
DEFAULT YES/NO
b) Basic settings
Reversing the rotating and swivel directions
The moving head can be either be stood on a surface or hung up. The rotating and swivel directions can
be reversed accordingly.
• Press the MENU button (4) until "INVERT" appears and then press the ENTER (3) button to confirm. Select
"PAN" with the UP (1) / DOWN (2) buttons and confirm your selection with the ENTER button.
All manuals and user guides at all-guides.com
Meaning
Sets the corresponding program elements for the scene
Sets the corresponding program elements for the scene
Sets the corresponding program elements for the scene
Sets the corresponding program elements for the scene
Sets the corresponding program elements for the scene
Sets the corresponding program elements for the scene
Sets the corresponding program elements for the scene
Sets the corresponding program elements for the scene
Sets the corresponding program elements for the scene
Sets the corresponding program elements for the scene (length
of scene)
Activates and plays scene
If you wish to set the moving head to play an infinite loop,
program an empty (all parameters set to zero) first ("STEP 000")
and last step ("STEP XXX") for the scene and save with "USE".
When the scene is turned on with CUSTOM, the moving head
then repeats the scene's preset steps in an infinite loop.
Loads the factory settings
39