Renkforce 1282378 Notice D'emploi page 38

Display Option
INVERT NORMAL /REVERSE Reverses rotating direction
PAN
INVERT NORMAL /REVERSE Reverses swivel direction
TILT
INVERT STEP
COLOR / LINEAR
INVERT YES/NO
USE
RANGE 0 - 255
P/START
RANGE 0 - 255
P/FINISH
RANGE 0 - 255
T/START
RANGE 0 - 255
T/FINISH
RANGE YES/NO
USE
SPECIAL YES/NO
BLACK
SPECIAL DMX / SYSTEM
RESET
EDIT 0 - 255
STEP
EDIT 0 - 255
PAN
EDIT 0 - 255
TILT
38
All manuals and user guides at all-guides.com
Meaning
Whole steps upon colour change
/ half steps upon colour change (split colour)
Activates the programmed INVERT settings
Limits angle of rotation, absolute start value
Limits angle of rotation, absolute end value
Limits swivel angle, absolute start value
Limits swivel angle, absolute end value
Loading the "DEFAULT" factory settings deletes the range
settings.
Activates the programmed "RANGE" limit settings.
Move-in-black - all dimmer channels are blacked out (set to 0%
brightness)
The moving head goes to the next start position; colour settings
or other control elements such as gobos are prepared/brought
into position without light.
Used for reset/restart
Reset/restart using an external DMX controller.
Reset/restart using an internal controller (see "INTRO RESET").
Sets a user-defined scene.
Enables/plays the programmed scene with CUSTOM (only for
professional users).
Sets the corresponding program elements for the scene
Sets the corresponding program elements for the scene