Basic Settings - Renkforce GM106 Notice D'emploi

b) Basic Settings
Reverse of the rotating and swivel directions and the display alignment
Since the moving head can be set up or hung up, the rotating and swivel directions and the display align-
ment can be reversed accordingly.
• Press MODE/ESC (1) repeatedly until PAn or rPAn appears.
• Select the desired rotating direction with the buttons UP (2) or DOWN (3) and confirm your input with the
button ENTER (4).
PAn = normal rotating direction
rPAn = inverted rotating direction
• Press MODE/ESC (1) repeatedly until tiL or rtiL appears.
• Select the desired swivel direction with the buttons UP (2) or DOWN (3) and confirm your input with the
button ENTER (4).
tiL = normal swivel direction
rtiL = inverted swivel direction
• Press MODE/ESC (1) repeatedly until diS or rdiS appears.
• Select the desired display alignment with the buttons UP (2) or DOWN (3) and confirm your input with the
button ENTER (4).
diS = normal display alignment
rdiS = inverted display direction
Limitation of rotating and swivel angle
To set the moving heads to the working environment, the turning and swivelling angles can be limited.
• Press MODE/ESC (1) repeatedly until PAxx appears (xx defines the max. rotating angle).
• Select the desired rotating angle with the buttons UP (2) or DOWN (3) and confirm your input with the
button ENTER (4).
PA18 = 180°
PA36 = 360°
PA54 = 540°
• Press MODE/ESC (1) repeatedly until tixx appears (xx defines the max. swivel angle).
• Select the desired swivel angle with the buttons UP (2) or DOWN (3) and confirm your input with the
button ENTER (4).
ti 9 = 90°
ti18 = 180°
ti27 = 270°
32