Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
head.
After the machine has been switched off, the light
will stay on for 3 minutes.
If the knob is already set to an operating speed
before the machine is powered, the light will start
flashing as soon as the machine is powered, but
the motor will not start. First turn the knob to OFF
and then set the speed.
Tips and operating techniques
We recommend using the lid to add the
ingredients through the special spout,
thus avoiding any splashes from liquid
mixtures.
Always insert and remove the lid with the
motor head in working position (D).
•
To determine the ideal duration of each
preparation, monitor the mixture and keep
mixing only until it looks just like in your
recipe.
•
We recommend adding the ingredients as
close as possible to the bowl side and not
directly into the moving utensil. Always use
the inlet on the splash-guard spout.
•
Solid ingredients such as walnuts, raisins or
candied fruit are usually added during the
last seconds of mixing at speed 1.
•
The mixture should be thick enough to
prevent such ingredients from sinking to
All manuals and user guides at all-guides.com
•
CLEANING AND
MAINTENANCE
beaters or other attachments. Failure to follow
this instruction may result in fractures, cuts or
bruises.
•
•
•
•
the bottom of the saucepan while you are
cooking.
Mixtures comprising large quantities of liquid
ingredients should be blended at low speeds
to avoid splashes. Increase the speed only
after the mixture has thickened.
Danger
of
injuries:
appliance before you touch the whisks/
Clean the outside of the machine with a soft
damp cloth.
Remove any utensils before cleaning the
machine.
Wash the flat beater, dough hook and steel
bowl using warm water and detergent. Rinse
and dry thoroughly.
Handwash the wire whisk.
Utensils and bowls should be washed
as soon as possible after use to prevent
any food from drying up on the surface.
Do not use abrasive detergents or wire
wool to clean the machine.
en
disconnect
the
15
Publicité
Table des Matières
