Stiga ST 500 Mode D'emploi page 31

Grass Trimmer
1. Technical Details
Model
Rated Voltage
Nominal Frequency
Nominal Consumption
No-load Speed
Cutting Width
Line Diameter
Line Length
Line Feed
Weight
Sound Pressure Level
Vibration
Interference suppressed in accordance with EN 55014 and EN 61000.
The machine comply with the safety class II/VDE 0700
We reserve the right to make changes to the technical specifications.
The devices are manufactured in accordance with the provisions of VDE 0730 2ZP and 0730 part 1:1972 and fully
comply with the provisions of the German Equipment and Product Safety Act.
2. General Safety Instructions
Information on noise emission in accordance with
"Machine Noise Information Ordinance 3. GPSGV
and Machinery Directives: the noise pressure level
at the place of work can exceed 85 dB(A). In such
cases the operator will require noise protection (e.g.
wearing of ear protectors).
Attention: Noise protection ! Please observe the local
regulations when operating your device.
Attention: Using electric power tools, you must
observe following fundamental safety instruc-
tions to protect yourself against electric shock,
against danger of injuries and danger of fire. Read
all these instructions before using the grass trimmer
and observe them. Keep these safety instructions at
a safe place.
The machine has been constructed according to the
latest technology and in accordance with the recog-
nised technical safety regulations. Nevertheless,
use of the machine can involve risks to the user or
third persons, and can cause damage to the
machine or other objects.
Use the machine in a safety conscious manner for
suitable applications and in technically perfect
condition only and according to the operating in-
structions! Immediately rectify or have any faults
rectified which could adversely affect safety!
Read the instruction manual carefully. It is important
that you fully understand and observe the safety
precautions and warnings before starting and using
your trimmer for the first time. Careless or improper
use of any trimmer may cause serious or fatal injury.
Observe all applicable safety regulations, standards
All manuals and user guides at all-guides.com
V~
Hz
W
min -1
cm
mm
m
kg
dB (A)
m/s²
GB-1
ST 500
230
50
500
10.000
30
1,4
2 x 5
Fully automatic
2,3
82 (according to EN 786)
0,6 (according to EN 786)
and ordinances. Please familiarise yourself with the
machine before the first use.
3. Application
The machine is exclusively intended for cutting deco-
rative lawn, i.e. lawn edges. Any other use or use going
beyond that, such as the cutting of brushwood and
hedges or large areas of lawn, is considered improper
use. The manufacturer / supplier is not liable for
damages resulting from such use. The risk is borne by
the user alone. A proper utilisation also includes the
observance of the operating manual and the compli-
ance with the conditions of control and maintenance.
Keep the operating manual always at hand near the
place the machine is used!
4. Safety Instructions
A. General Instructions
1. Your electric trimmer is a high-speed, fast-cutting
power tool. The electrical connection and cut-
ting tool are potential sources of danger. There-
fore, special safety precautions must be ob-
served to reduce the risk of personal injury.
2. Always switch off the trimmer and disconnect
the plug from the power supply before carrying
out any maintenance or repair work on the unit.
Always unplug the trimmer if you leave it without
supervision.The device must always be switched
off and the plug removed from the socket before
all adjustments or cleaning, or before the con-
nection is checked for creases or damage.
3. Have your dealer or a specialist show you how to
operate your trimmer.
ENGLISH