Contents
1
Key to symbols and safety instructions . . . . . . . . . . . . . . . . . . 5
1.1
Explanation of symbols . . . . . . . . . . . . . . . . . . . . . . . . . . 5
1.2
Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2
Product details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2.1
Standard delivery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2.2
2.3
Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
3
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
3.1
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
3.2
4
Commissioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
5
6
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
1
Key to symbols and safety instructions
1.1
Explanation of symbols
Warnings
Warnings in this document are framed and identified by
a warning triangle which is printed on a grey
background.
Electrical hazards are identified by a lightning symbol
surrounded by a warning triangle.
Keywords indicate the seriousness of the hazard in terms of the
consequences of not following the safety instructions.
• NOTICE indicates that material damage may occur.
• CAUTION indicates that minor to medium injury may occur.
• WARNING indicates that serious injury may occur.
• DANGER indicates possible risk to life.
Important information
Important information in cases where there is no risk of
personal injury or material losses is identified by the
symbol shown on the left. It is bordered by horizontal
lines above and below the text.
Additional symbols
Symbol
Meaning
a step in an action sequence
B
a reference to a related part in the document or to other
related documents
a list entry
•
a list entry (second level)
-
Table 1
Logamatic web KM200 - 6 720 802 642 (2012/08)
All manuals and user guides at all-guides.com
1.2
Safety instructions
B Observe all country-specific regulations and standards during
installation and operation.
B Observe all instructions to ensure satisfactory operation.
B This product must only be installed and commissioned by an
approved contractor.
B Never install this product in wet rooms.
B Install and commission heat sources and other accessories according
to the relevant instructions.
B Use this product exclusively in conjunction with the programming
units and heat sources listed. Observe connection diagram.
B Use the power supply unit provided to connect this product to the
230V mains supply.
About these instructions
These installation instructions contain important information regarding
the safe and proper installation, commissioning and maintenance of the
product.
These installation instructions are intended for qualified contractors
who, as a result of their training and experience, are skilled in dealing
with electrical installations and heating systems.
2
Product details
To fully use all functions, internet access is required. This
may incur additional costs.
Also, the EasyControl app, which is subject to charge, is
required to control the system via a smartphone.
• This module is used as an interface between the heating system and a
1)
network (LAN)
.
• Control and monitoring of a system with an Smartphone
• Can be combined with:
- Heat sources with EMS-BUS interface from date of manufacture
2003
- Logamatic EMS control system with an RC30 or RC35
programming unit.
2.1
Standard delivery
Fig. 1, page 50:
[1]
Module
[2]
Plug power supply unit with connecting cable (2 m long)
[3]
LAN cable CAT 5 (2 m long)
[4]
Bag with installation material
[5]
Installation instructions
2.2
Cleaning and care
B If required, wipe the enclosure with a damp cloth. Never use
chemically aggressive or acidic cleaning agents.
2.3
Specification
The design and operation of this product conforms to the
European Directives and the supplementary national
requirements. Its conformity is demonstrated by the CE
designation. You can call up the Declaration of Conformity for this
product on the internet at www.buderus.de/konfo or request a copy
from your local Buderus sales office.
1) A free RJ45 socket is required on the router to connect the module.
2) To see which devices are supported, please go to our home page.
Contents
2)
.
5