Key To Symbols And Safety Instructions; Key To Symbols; Safety Instructions; Product Details - Buderus Logamatic web KM200 Notice D'installation

Contents
Contents
1 Key to symbols and safety instructions . . . . . . . . . . . . . . . . . 14
1.1 Key to symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
1.2 Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
2 Product details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
2.1 Standard delivery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
2.2 Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
2.3 Cleaning and care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
3 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
3.1 Overview of the commissioning steps . . . . . . . . . . . . . 15
3.2 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
3.3 Electrical connections . . . . . . . . . . . . . . . . . . . . . . . . . . 15
3.4 Connecting the BUS connections . . . . . . . . . . . . . . . . . 15
4 Commissioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
5 Environment / disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
6 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
1

Key to symbols and safety instructions

1.1

Key to symbols

Warnings
Warnings in this document are identified by a warning
triangle printed against a grey background.
Keywords at the start of a warning indicate the type and
seriousness of the ensuing risk if measures to prevent
the risk are not taken.
The following keywords are defined and can be used in this document:
• NOTE indicates a situation that could result in damage to property or
equipment.
• CAUTION indicates a situation that could result in minor to medium
injury.
• WARNING indicates a situation that could result in severe injury or
death.
• DANGER indicates a situation that will result in severe injury or
death.
Important information
This symbol indicates important information where
there is no risk to people or property.
Additional symbols
Symbol Explanation
▶ Step in an action sequence

Cross-reference to another part of the document
• List entry
- List entry (second level)
Table 1
14
1.2

Safety instructions

▶ Observe all country-specific regulations and
standards during installation and operation.
▶ Observe all instructions to ensure satisfactory
operation.
▶ This product must only be installed and
commissioned by an approved contractor.
▶ Never install this product in wet rooms.
▶ Install and commission heat sources and other
accessories according to the relevant instructions.
▶ Use this product exclusively in conjunction with the
programming units and heat sources listed.
Observe connection diagram.
▶ Use the power supply unit provided to connect this
product to the 230 V mains supply.
About these instructions
These installation instructions contain important
information regarding the safe and proper installation,
commissioning and maintenance of the product.
These installation instructions are intended for
qualified contractors who, as a result of their training
and experience, are skilled in dealing with electrical
installations and heating systems.
2

Product details

To fully use all functions, internet access is required. This
may incur additional costs.
Various solutions are available for controlling your
system using our online services. Please visit our website
for more information ( back of these instructions).
• Interface between heating system and a network (LAN)
• Controlling and monitoring a system using a smartphone
• May be combined with the following:
- Logamatic EMS plus control system with RC300 programming
unit
- Heat sources with EMS-BUS interface from date of manufacture
2003
- Logamatic EMS control system with RC30 or RC35 programming
unit
- Heat pumps with HMC10 basic controller from V1.10.
2.1

Standard delivery

Fig. 1, page 82:
[1] Module
[2] Plug power supply unit with connecting cable
[3] CAT 5 LAN cable
[4] Bag with installation material
[5] Installation instructions
1) Connecting this module requires a router with available RJ45 socket.
2) To see which devices are supported, please go to our home page.
Logamatic web KM200 - 6 720 805 486 (2018/12)
1)
.
2)