How To Use Advanced Functions; Swing Function; Airflow Direction - mundoclima MUPR-H11 Manuel D'installation Et L'utilisauter

How to Use Advanced Functions

Swing function

Press Swing button
Swing
The horizontal louver will swing up and down
automatically when pressing Swing button.
Press again to make it stop.

Airflow direction

Swing
NOTE: When the unit is off, press and hold MODE and SWING buttons together for one second,
the louver will open for a certain angle, which makes it very convenient for cleaning. Press and hold
MODE and SWING buttons together for one second to reset the louver
LED DISPLAY
Press LED button
LED
Press this button to turn on and turn off
the display on the indoor unit.
2s
Swing
Keep pressing this button more than 2 seconds,
the vertical louver swing function is activated.
(Not for this model)
If continue to press the SWING button, five
different airflow directions can be set. The
louver can be move at a certain range each
time you press the button.
until the direction you prefer is reached.
(Model dependent).
5s
LED
Keep pressing this button more than 5 seconds,
the indoor unit will display the actual room
temperature. Press more than 5 seconds again
will revert back to display the setting temperature.
108
Press the button
Press this button more
than 5 seconds(some units)