Maintenance; Cartridge Replacement - Conglom QL105 Manuel De L'utilisateur

Maintenance

CARTRIDGE REPLACEMENT

- Turn off the water supply to the faucet .
- Unscrew the handle lever (1) . Loosen the set screw (2) with the hex key and remove the handle body (3) .
- Gently unscrew the decorative cap (4) and retaining nut (5) .
- Pull the cartridge (6) out of the faucet body (7) and replace it with a new ceramic cartridge . Ensure new cartridge is seated properly
with the locating pins in appropriate place .
- Secure the cartridge in place using the retaining nut (5) .
- Gently tighten the retaining nut (5) using a wrench . Do not overtighten .
- Reinstall the decorative cap (4) . Slide the handle body (3) back onto the cartridge and make sure it rotates freely . Secure the handle
body (3) in place using the set screw (2) and reinstall the handle lever (1) .
- Turn the water supply to the faucet back on .
- Operate the faucet to make sure everything works correctly and check for leaks .
QL105
Faucet Body (7)
Cartridge (6)
Decorative Cap (4)
Retaining Nut (5)
Handle Lever (1)
O-Ring (8)
Set Screw (2)
Handle Body (3)
10