Abicor Binzel ADF 600S Mode D'emploi page 29

ADF 600S
6.3.1 Adjusting head height
1
1
Head band
Fig. 5 Adjusting head height
1 Press the positioning pin (2) out of the head band (1).
2 Adjust the head band (1) to the appropriate size and click the positioning pin (2) in.
6.3.2 Adjusting the distance of the eyes to the welding mask
1
1 Head fixing
Fig. 6 Adjusting the distance of the eyes to the welding mask
1 Loosen the plastic nuts (2) and move the head fixing (1) back and forth in the direction of the arrows.
Determine your individual distance by doing this.
NOTICE
• In order to ensure uniform darkening, ensure equal distance of the eyes to the visor.
2 Tighten the plastic nuts (2).
All manuals and user guides at all-guides.com
2
Positioning pin
2 2 plastic nuts
6 Putting into operation
2
2
EN - 11