Parts Diagram - Russell Hobbs RH1130 Instructions Et Garantie

27. The manufacturer does not accept responsibility for any damage or injury caused
by improper or incorrect use, or for repairs carried out by unauthorised
personnel.
28. In case of technical problems, switch off the machine and do not attempt to repair
it yourself. Return the hand mixer to an authorised service facility for
examination, adjustment or repair. Always insist on the use of original spare
parts. Failure to comply with the above mentioned pre-cautions and instructions,
could affect the safe operation of this machine.
NOTICE: This appliance is not for professional use. You should follow the requested
breaks. Failure to follow this instruction carefully may result in damage to the motor.
When using the hand mixer, the unit must not be used for longer than 1 minute cycles,
as this puts pressure on the motor which could lead to overheating and product
malfunction. It is recommended to allow the hand mixer a few seconds break after each
cycle and not to use for more than 5 minutes for one single operation.

PARTS DIAGRAM

1. Motor/Mixer body
2. Handle Cover
3. Beaters/Dough hook ejection button
4. Speed selector
5. Turbo boost button
6. Non slip strip
7. Dough hook (for large hole)
8. Dough hook (for small hole)
9. Beaters
4