In The Web Interface - Conrad 98 91 96 Notice D'emploi

b) In the Web Interface
• To reset the WLAN router to the factory settings with the web interface, connect it to the plug-
in mains adapter and plug it into a mains socket. Wait for approx. 1 minute until start-up has
been completed. Log into the web interface as described in chapter 8.
• First click "Administration" and then "Settings Management".
Click the button "Load Default" to start the reset process.
• Whether or not the reset was accepted by be seen by all LEDs except for the Power LED
going out for a certain time after a few seconds.
• The device now restarts. This will table take about 1 minutes. Then it is reset to factory set-
tings.
62
All manuals and user guides at all-guides.com