Changing The Administrator Password - Conrad 98 91 96 Notice D'emploi

Each block of the IP address must be in the range between 1 and 254.
• If you want to access to web
interface, you need to enter the
changed IP address into your
browsers address line accord-
ingly.
Please note:
Once the product recognises a DHCP server in the network, the integrated one
is deactivated. However, this only applies for the operating mode „Bridge". The
DHCP server is always active in the two other operating modes.
You can adjust the IP address and the DHCP area as you wish here.
b) Changing the Administrator Password
• To change the administrator password, click the sub-item "Management" in the menu item
„Administration".
• Enter any password in the fi eld "Password".
Save the settings by clicking "Apply".
• The web interface is automatically updated and you need to enter the password again for
logging on.
All manuals and user guides at all-guides.com
59