Conrad 98 91 96 Notice D'emploi page 50

• The WLAN is confi gured on this page. If desired, change the WLAN name fi rst. For this, enter
any name of letters and fi gures behind "Network Name (SSID)". Underscore and dashes are
also permitted.
To activate encryption, open the menu behind "Security Mode" and best select "WPA2-PSK".
Enter the safest password possible in the fi eld "Pre-Shared Key". The same characters as in
the name are permitted here. The password must consist of at least 8 characters.
Click the button "Apply" to save and complete setup.
• The device now restarts and confi guration is assumed.
Please note:
If the IP-address has changed, you need to log on to the web interface again after
the restart. For this, enter the changed IP address into the address line of the
browser. It may also be necessary to disconnect your PC from the network briefl y
fi rst to have a new IP address assigned to it. You may also restart your PC.
Also observe chapter 12 a) on how to change the IP address.
• If desired, you may also change other settings now. Alsoo observe chapter 12 of these operat-
ing instructions on this.
• Confi guration is now complete. Your computers now can access the router and the internet as
usual via the ports „LAN1 and "LAN2" or WLAN.
50
All manuals and user guides at all-guides.com