Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
4288820000_IS_PRO_Bridge.qxd:428882_IS_PRO_Bridge.qxd
4.
Mounting
The analogue signal isolators are mounted on standard TS 35 rails.
5.
Electrical connection
Terminal assignments
1 Supply voltage to the bridge +
2 Supply voltage to the bridge -
3 Not assigned
4 Input +
5 Input -
6 Not assigned
7 Output 0/4...20 mA
8 Output 0...5/10 V
9 Output 0 V- reference potential
10 Power supply + 24 Vdc (cross-connected)
11 Power supply - GND (cross-connected)
12 Not assigned
Wire cross-section max. 2.5 mm
Multi-wire conncection max. 1 mm
(two wires with same cross-section)
Warning! For applications with high isolation voltages, take measures to
prevent accidental contact and make sure that there is suffi-
cient distance or insulation between adjacent devices!
5.1 Technical Data
Supply voltage
Operating temperature
Voltage supply via cross-connections. Operating carrying capacity of
cross-connection
14
2
2
18 ... 30 Vdc/approx. 1 W
0 °C ... +55 °C
2 A (see Cat. No. point 7)
10
11 12
7 8
9
1 2 3
4 5 6
07.07
Publicité
Table des Matières
