Table des Matières
Publicité
2 - W I R E
D O O R
E N T R Y
S Y S T E M S
PROGRAMMING INSTRUCTIONS
DESCRIPTION
Lock release
Programing switch
Monitor
Lock release
Programming switch
The connection bracket/telephone must be programmed from the main entrance panel of the system (
Entrance panel with keypad configuration
instructions
).
The programming code is stored in the connection bracket/telephone. If the connection bracket/telephone is replaced, remember to re-program it.
In installations where several devices (i.e. telephones or monitors) are associated to the same call line (in parallel), each device should be
programmed separately but all should have the same code.
Publicité
Table des Matières
