Installation With 2 Points Of Entry - Alcad PDK-61911 Mode D'emploi

INSTALLATION WITH 2 POINTS OF ENTRY

REMARKS
Configuring the entrance panel
Configure one of the panels as the main panel. Configure the remaining panels as secondary panels, assigning consecutive identification numbers
to each. See "Entrance panel with keypad configuration instructions", page 24.
Programming the telephones/connection bracket of the monitor in each dwelling
The telephone/connection bracket of the monitor in each dwelling must be programmed from the entrance panel designated as the main panel
of the building. See "Programming instructions", page 18.
2 - W I R E
SINGLE-WIRED DIAGRAM. 8 DWELLINGS
END
B2 B1
DIV-054
cod.9730070
B1B2 B1B2 B1B2 B1B2 B1B2 B1B2
DIV-054
cod.9730070
B1B2 B1B2 B1B2 B1B2 B1B2 B1B2
D O O R E N T R Y S Y S T E M S