I N S TA L L I N G I N S T R U C T I O N S
RECOMMENDATIONS -
When installing the entrance panel make sure that the sunrays or intense light sources do not fall directly on the video unit, avoiding
nonwhished effects in picture display (backlight effect) and same way keeping the operational life of the equipment.
FLUSH MOUNTED BOX
Break off the perforated holes that you need to
pass the cables through.
SURFACE BOX
Break the perforated openings needed to pass the
cables through.There are two openings at the
back.
D O O R
E N T R Y
S Y S T E M S
Place the flush-mounted box in position so that the
top is 1.7 m. high.
Place the surface box in position so that the top
is 1.7 m. high.