How To Clear A Blockage; How To Maintain Brushroll - Eureka NEU180 Serie Mode D'emploi

How to clear a blockage

C A U T I O N
!
Make sure vacuum is turned off
and power cord is unplugged.
If vacuum is not cleaning floors, or
if no suction at end of hose, check
to be sure air path is not blocked.
• Press release button and lift off dust
cup (Fig. 1).
• Empty debris. Hold over wastebasket
and press lever to release bottom lid
(Fig. 2).
• Check filter and filter screen.
Remove any debris and shake off
dust. (See maintenance instructions
on page 9.)
• Loosen end of hose.
• Use a rod or similar blunt implement to
clear a blockage in wand or hose. Flex
hose to loosen debris (Fig. 3). Use
caution if there is any risk that glass
or nails could have become imbedded
in hose.
• Use finger to check for debris in air
path (Fig. 4).
• Reinstall filter and filter screen inside
dust cup and position dust cup onto
vacuum cleaner.
Warning: Never operate vacuum
!
cleaner without foam filter, filter
screen and dust cup in proper
position.
10
Eureka Customer Service HELPLINE 1-800-282-2886
1 2
3

How to maintain brushroll

C A U T I O N
!
Make sure vacuum is turned off
and power cord is unplugged.
• Step on handle release to lower
handle.
• Turn vacuum face down on floor.
• To avoid unnecessary service
calls, check brushroll for debris.
• Use scissors to clip heavy
threads or strings.
How to maintain turbo brush
Select models only (NEU182-NEU188 except NEU182A)
Grasp collar and twist to unlock With cover open, use figers or small
cover. Lift cover up. brush to clear accumulated pet hair
from bristles.
Close cover and twist collar
to lock.
11
www.eureka.com