How To Use Accessories; How To Maintain Dust Cup And Filters - Eureka NEU180 Serie Mode D'emploi

How to use accessories

C A U T I O N
!
When using tools, always place handle in
upright position. Make sure vacuum
cleaner is turned off while attaching tools.
• Place vacuum in upright position.
• Turn height adjustment knob to highest
position.
• Pull up on hose connection to release hose end
from hose inlet (Fig. 1).
• Push end of hose into top of handle and twist
clockwise until it clicks (Fig. 2).
• Press handle release latch and pull out handle
with wand (Fig. 3).
• To attach accessories, push desired tool onto
end of wand (Fig. 4).
• To use accessories without handle and wand, push
desired tool directly onto end of hose (Fig. 5).
• When finished using accessories, twist hose
counterclockwise and pull off handle. Slide
handle into top of vacuum cleaner and push
down until it clicks. Push loose end of hose
securely onto hose inlet. Store tools on vacuum
cleaner back. (See page 5.)
Crevice tool (NEU180-NEU187) – Upholstery tool
(NEU180-NEU187) –
Use for baseboard edges, corners,
detailing chairs, sofas, dryer vents Use for furniture, chairs,
and tight spaces. sofas and mattresses.
Flexible telescoping crevice tool (NEU188) – Press button and
pull to extend tool to desired length. To use brush, pull to swivel
into position. Use for baseboards, crevices and tight spaces.
Accessories may vary depending on which model was purchased.
8
Eureka Customer Service HELPLINE 1-800-282-2886
1 2
Click!
3
4
5
2-in-1 upholstery tool (NEU188) –
Use brush to vacuum upholstered
surfaces or pick up debris. Use felt
portion to clean delicate surfaces.
Press thumb release and lift brush up
and out of the way.
Dusting brush Turbo brush
(NEU180-NEU187) – (NEU182-NEU188 except NEU182A) –
Use for furniture, drapes, Use to remove pet hair from stairs,
blinds, drawers and vents. carpet and upholstery.

How to maintain dust cup and filters

Dust cup – Empty after each use
Press release button and lift Hold dust cup over wastebasket
and press lever to release
off dust cup.
bottom lid. Debris will empty.
Washable dust cup filters – Clean monthly
Pull dust cup latch to lift up Lift out foam filter and
dust cup lid. shake off dust. Rinse
foam filter and dry
THOROUGHLY.
Align tab on filter screen with Reinstall foam filter.
slot on back of dust cup and
drop into position.
Warning: Never operate vacuum cleaner without foam filter, filter screen and
!
dust cup in proper position.
Click!
Close bottom lid until it
clicks.
Grip tabs and lift out filter screen. Twist
bottom of filter screen counterclockwise
to unlock and pull apart. Shake off dust.
Rinse screen and dust cup. Dry all
THOROUGHLY. Reassemble screen;
twist clockwise to lock.
Click!
Close cover until it clicks.
9
www.eureka.com